✆ 77 77 22 88

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Hybrid Control Panel i-on30EX-EUR 10 zone expendable to 30

Quick Overview

Hybrid Control Panel i-on30EX-EUR 10 zone expendable to 30

Thei-on30EX-EUR is a control unit for a hybrid wired/wirefree alarm system intended for commercial or large domestic use.

The control unit pcb provides terminals for a single bus. The bus allows you to connect up to 10 peripheral devices using standard four wire alarm cable. The peripheral devices can be any mixture of keypads, zone expanders (for wireless or wired detectors) or remote power supplies. (Note that no more than two expanders can have zones connected to them.) The control unit pcb also provides a range of connectors for outputs, communicators, and up to 10 FSL (Fully Supervised Loop) or five CC (Closed Circuit) zones.

A range of wireless peripherals is available for operation with the wireless expanders. The range includes a door contact/universal transmitter, a passive infra red detector, smoke detector, external siren, 4 button remote control, and remote radio keypad. The keypads allow end users to set and unset the system, and the installer to configure the control unit. The keypads also contain integral proximity tag readers, allowing end users to control the system without having to remember access codes. (Note that a system requires at least one wired keypad.)

This control unit is designed and approved to be used as part of a Security Grade 2 system.

The product is available ONLY for Professional Installers

Availability: In stock


• Compliance PD6662:2010, EN50131-3:2009 and EN50131-6:2008 Grade 2 and environmental class 2 - EN50131-3:2009, EN50131-6:2008, BS8243:2010
• Zones 10 on board, expandable to 30, all fully programmable
• Bus devices Accepts up to 10 bus devices (of which 1 must be a keypad)
• Proximity reader The wired and wireless keypads contain a proximity reader as standard
• Partitions 4 independent partitions or full set and three part sets
• Event log 350 events; 250 mandatory events and 100 non-mandatory events
• Users Up to 50 users with 4 digit user codes, with the option for each user to add a proximity tag, radio remote control and radio panic button (*Requires radio expander EXP-R10 or EXP-R30)
• Internal sounder Panel: one 16Ω speaker
• Wired expander: one independently controlled 16Ω speaker
• Radio expander: one independently controlled 16Ω speaker
• Outputs Panel: Bell and strobe, one 500mA open collector programmable output, 12 communications
• low-current outputs
• Radio expander: Eight radio outputs
• Wired expander: 4 x 100mA, open collector programmable outputs
• Remote communications i-on footprint for connection of a range of alarm communications modules as described below.
• i-on30EXD adds a built-in digi/modem
• Configurations options i-on Downloader via USB or plug-on comms module, or by built in PSTN comms (i-on30EXD only)
• Power supply 1.0Amp, conforms to EN50131-6 Type A power supply, rated power output 750mA whilst charging one 7Ah battery
• Battery Accepts one 12v standby battery up to 7Ah rechargeable lead acid, gel type.
• Dimensions Panel: 245 x 235 x 90 mm Keypad: 115 x 156 x 34mm Expander: 230 x 144 x 44mm
• Weight Panel: 2.8Kg Keypad: 0.26Kg Expander: 0.42Kg

• Temperature range Environmental class 2 -10°C to 55°C @ 0-93% RH

Additional Information

SKU 3961
Type of product No
Comments No
Dimensions 240x250x87 mm


  User Guide



video No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Also Purchased